DECORATIVESTREET LUM 4000K-ZHAGA-23W-3500LM-IP65-HA

The domestic Talas LED lamp with Zhaga readiness and IP65 rating is designed especially for the needs of cities and municipalities. The pole lamp is ideally suited for building entrances, parking areas, residential zones, promenades, and park and bike paths. The LED light source combined with a Zhaga-compatible sensor provides energy savings and Zhaga-controllability for flexible adaptation to the site's requirements.

ZHAGA BOOK 18 is designed as an independent system to enhance the lamp's features with auxiliary sensors when additional functions are needed (in ANSI/NEMA-based luminaires). Karlux installs a Zhaga Book 18 connector with a sealing cap on the luminaire it manufactures. The end customer, such as a municipality, decides independently what additional functions to add according to need, for example, a motion sensor. Required components: 2213858-1 (Lumawise Endurance S Receptacle), 2388426-1 (Lumawise Sensor), a connection device supporting the D4i standard, 2213795-1 (Sealing Cap) – required only if the sensor is not immediately installed on-site. 2396399-1 (Lumawise Motion Mask) – required only when you wish to prevent detection in a specific direction.

NOTE! During testing, ensure the light level is set to: On: 35 lux, Off: 18 lux. Otherwise, after power is switched on, the sensor will automatically set its own configuration (flickering the lights) and remain waiting for the light level to drop to the threshold at which the sensor operates (On: 35 lux, Off: 18 lux).

Features

• Body made of cast aluminum, hood of powder-coated aluminum, lens of impact-resistant acrylic
• Gray RAL 7037
• LED module 23 W / 3500 lm
• Mounting to pole (60 mm)
• Mounting height 3–6 m
• KARLED LED module, >100 000 h L90/B10
• Color temperature 4000 K
• Ra >80
• Connector lifespan >100 000 h
• DALI controllable
• IK10
• Protection class IP65
• Luminaire supplied pre-wired with 5 m MMJ 5X1,5 S cable

When required, the Talas LED module can be easily replaced with a new KARLED LED module. The Talas LED is also available with wall mounting and a two-arm pole adapter. Additionally, power reduction/dimming programming, particularly popular in housing companies, can be ordered for the luminaire – ask for more details!

This product description is an automated translation of the original Finnish description.