STREET LUMINAIR TALAS 4000K-ZHAGA-23W-3500LM-IP65-HA

Domestic Talas LED lighting with TIE OPTICAL and Zhaga readiness, IP65 is designed especially for the needs of cities and municipalities. The pole light is ideally suited for building entrances, parking areas, residential zones, promenades, and park and bike paths. The LED light source combined with a Zhaga-compatible sensor provides energy savings and Zhaga-controllability for flexible adaptation to the site’s requirements.

ZHAGA BOOK 18 is designed as an independent system to enhance the luminaire’s features with auxiliary sensors when additional functions are needed (in ANSI/NEMA-based luminaires). Karlux installs a protective cover on the Zhaga Book 18 connector on the luminaire it manufactures. The end customer, such as a municipality, decides independently what additional functions to add as needed, e.g., a motion sensor. Required components: 2213858-1 (Lumawise Endurance S Receptacle), 2388426-1 (Lumawise Sensor), D4i standard-compatible connector 2213795-1 (Sealing Cap) – required only if the sensor is not immediately installed on-site. 2396399-1 (Lumawise Motion Mask) – required only when you wish to prevent detection in a specific direction.

NOTE! During testing, ensure the light level is set to: On: 35 lux, Off: 18 lux. Otherwise, after power is turned on, the sensor will automatically set itself (flickering the lights) and wait for the light level to drop to the threshold at which the sensor operates (On: 35 lux, Off: 18 lux).

Features:

• Body made of cast aluminum, hood of powder-coated aluminum, lens of impact-resistant acrylic
• Gray RAL 7037
• LED module 23 W / 3500 lm
• Mounting to pole (60 mm)
• Installation height 3–6 m
• KARLED LED module, >100,000 h L90/B10
• Color temperature 4000 K (also available in 3000 K upon request)
• Ra >80
• Connector lifespan >100,000 h
• DALI controllable
• IK10
• Protection class IP65
• Luminaire supplied pre-wired with 5 m MMJ 5X1.5 S cable

When needed, the Talas LED module can be easily replaced with a new KARLED LED module. Talas LED is also available with wall mounting and a two-arm pole fitting. Additionally, power reduction/dimming programming, particularly popular in housing companies, can be ordered for the luminaire – ask for more details!

Contact domestic Karlux easily if any questions arise. You can also find Karlux Oy on Facebook and Instagram.

ENVIRONMENT – QUALITY – CRAFTSMANSHIP – KARLUX This product description is an automated translation of the original Finnish description.